Saturday, 30 June 2012

Remove VMware from Linux

Manually uninstalling VMware Workstation from Linux hosts


This article provides steps for manually removing VMware Workstation when the uninstaller script or RPM package fails to remove the product automatically.


Note: Log on to the host to the root account to execute the Terminal commands in this article. If running Ubuntu, the root account is not available by default. Prepend all commands with sudo or switch to the root using the command:
sudo su -
Warning: This command provides unrestricted access to the operating system. It is possible to cause damage the system when using this access level.
  1. Open a command prompt. For more information, see Opening a command or shell prompt (1003892). Type the commands as indicated in the following steps.
  2. Shutdown all VMware applications and services.

    /etc/init.d/vmware stop 

  3. Verify that all processes have stopped:

    lsmod | grep vm
    Note: A zero must be listed beside VMware related modules to indicate that they are no longer running.
  4. Move the VMware libraries to the /tmp directory:

    cd /lib/modules/<kernel_version>/misc
    mv vm* /tmp 

    Note: If the kernel has ever been updated you must check and move the files from multiple paths. Substitute the kernel version where indicated above.
  5. Unload the kernel modules:

    rmmod vmnet.ormmod vmmon.o
    rmmod vmci.o
    rmmod vmblock.o
    rmmod vmppuser.o 

  6. Remove the VMware startup scripts:

    RedHat and Most Distributions 
    rm /etc/rc.d/init.d/rc2.d/*vmware*
    rm /etc/rc.d/init.d/rc3.d/*vmware*
    rm /etc/rc.d/init.d/rc5.d/*vmware*
    rm /etc/rc.d/init.d/rc6.d/*vmware*

    rm /etc/rc2.d/*vmware*
    rm /etc/rc3.d/*vmware*
    rm /etc/rc5.d/*vmware*
    rm /etc/rc6.d/*vmware*

    Note: If you are using a different Linux distribution, substitute the correct path in above commands.
  7. Remove the remaining VMware files and directories:

    rm -rf /etc/vmware*rm /usr/bin/vmware*rm /usr/bin/vmnet*
    rm -r /usr/lib/vmware*

    rm -r /usr/share/doc/vmware*
  8. If an RPM package was used to install the VMware product, complete these steps to delete the RPM database entry:

    rpm -qa | grep VMware
    A list of VMware packages is presented. Copy the exact package name for the next step and paste it into the command where indicated.
  9. Remove the VMware packages:

    rpm --erase --nodeps <VMware_Package_Name>

Request a Product Feature

To request a new product feature or to provide feedback on a VMware product, please visit the Request a Product Feature page.


Saturday, 23 June 2012

Windows Server 2012: Free EBook!

For the last few months I have been talking about Windows Server 2012, and I am thrilled to see that so many of you are downloading it and using the Release Candidate.  When the product does release so many IT Pros will be ready to hit the ground running! 
If you, like me, are one of these who wants the newest and the best and want to take the time to learn it properly, there is a great new book from Microsoft Press (By Mitch Tulloch and the Windows Server Team) available for free on-line.  You can download it by clicking here:
Now if you were fortunate enough to be at TechEd last week, they were handing out hard copies (which is my personal preference).  I assume that they will be doing the same next week at TechEd Europe…
By the way, the book is based on the beta release, not the Release Candidate.  So there may be some changes that you have to be aware of.  Relax though… it’s still pre-release software, and will be ready when it goes to market!

Thursday, 7 June 2012

How to use FTP with Command Line (Command Prompt)

How to use FTP from the command line. 

 FTP (File Transfer Protocol) allows you to transfer files between your PC and other Internet systems (hosts). You can transfer files, work with local or remote directories, rename and display files, and execute system commands.

Before you start, you must know how to log on to the remote system and have a userid and password on that system. Note: Some systems allow anonymous ftp access. To use anonymous ftp, use anonymous as your userid and your e-mail address as the logon password. Logging Onto and Off of a Remote System To begin using Microsoft's FTP client, Open a command prompt and switch to the destination directory (where you want the download file).

To start an FTP session, enter: ftp host_name where hostname is the name or IP address of the remote system. You will then be asked to enter your userid and password.

Once you have successfully logged onto a remote system, you will be able to use ftp commands to view a listing of files on the remote system and transfer files between the two systems.

Example: Download i386.exe (Windows NT 3.5 Resource Kit) from to C:\Temp\Download
  1. Open a command prompt. Enter CD C:\Temp\Download (assuming that directory exists).
    Enter: ftp

    You should now see a prompt similar to this:
    Connected to
    220 Microsoft FTP Service
    User (

  2. For the userid, Enter: anonymous

    You should see a prompt similar to this:
    331 Anonymous access allowed, send identity (e-mail name) as password.

  3. Enter: as the password at the "Password:" prompt.
    Note: Any e-mail address in a format should work. You will not be able to see the password as you type it.

  4. To download i386.exe from the bussys/winnt/winnt-public/reskit/nt35/i386 directory, Enter: get bussys/winnt/winnt-public/reskit/nt35/i386/i386.exe
    Note: You could have also used ls to view the directory and file names, cd bussys/winnt/winnt-public/reskit/nt35/i386 to switch directories, and get i386.exe to download the file from within that directory.

  5. To end the FTP session, Enter: quit or bye.
Note: Once you have extracted the resource kit, you will have to expand individual files 
example: expand choice.ex_ choice.exe

FTP Commands

For a list of FTP commands, at the "ftp>" prompt, Enter: helpWhen using ftp from the command prompt, the following list of supported commands will be displayed:
Note: Hover your mouse over a command to see what the output of "help *" is for that command.











































The question mark (?) command is equivalent to the help command. Typing help or ? followed by the name of a command will display a brief description of the command's purpose. The exclamation point (!) can be used to shell to the system (command) prompt. Type Exit to return to the FTP session.

You can also issue a subset of system commands to perform as you shell out, e.g., ! dir %windir% | more. When the commands in the shell have completed, you will be returned to the FTP session. The pwd command will list the current directory on the remote machine.

To change directories on the remote machine, use the cd command. To create a new directory on the remote machine, use the mkdir command followed by the name you would like to assign to the new directory. The lcd command can be used to change directories on the local (PC) machine.

To display a listing of files on the remote system, enter: ls or dir.

To download a file (copy a file from the remote system to your PC), you can use the command get or recv followed by the name of the file you would like to download. Optionally, you can follow the filename with a second filename which will be assigned to the file when it is downloaded to your PC.

To download multiple files, you can use the mget command followed by a descriptor for the files you would like to download (e.g.: *.f for all files ending in ".f" or *.* for all files).

You will be prompted to indicate whether you would like to download each file in turn. To turn off this prompting, enter the prompt command prior to entering the mget command; you will receive the message "Interactive mode OFF" indicating that prompting has been deactivated. By default, files are downloaded and uploaded in ASCII file transfer mode.

To download or upload files using Binary format mode, enter the command Binary at the "ftp>" prompt prior to downloading or uploading the file(s). To return to ASCII file transfer mode, enter the ASCII command. To upload a file (copy a file from your PC to the remote system), you can use the command put or send followed by the name of the file you would like to upload.

Optionally, you can follow the filename with a second filename which will be assigned to the file when it is uploaded to the remote system. The mput command can be used to upload multiple files.

You can use the close or disconnect command to drop the current ftp connection without exiting from the command enironment and then use the open command to connect to a new host.